Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.
Advertisement
Scientific Reports volume 13, Article number: 20220 (2023)
31
Metrics details
Acoustic backscatter has been used as a tool to map the seafloor in greater detail and plays an increasingly important role in seafloor mapping to meet multiple ocean management needs. An outstanding challenge to the use of backscatter for seafloor mapping is the distinction between acoustically similar substrates, such as mixed sediments from rhodoliths. Rhodolith beds are a biogenic substrate that provides important ecological services, and are typically classified as a single categorical substrate type—though nodules coverage may be spatially variable. Recently, multispectral acoustic backscatter has demonstrated great potential to improve thematic seafloor mapping compared to single-frequency systems. This work employs multispectral multibeam backscatter and underwater imagery to characterize and map rhodolith beds in the Costa das Algas Marine Protected Area (Brazil). A support vector machine classifier was used to classify multifrequency backscatter mosaics according to rhodolith classes identified from underwater imagery. Results suggest that multispectral backscatter is effective both in providing information for mapping different proportions of rhodolith coverage and in predicting the presence or absence of these nodules. The backscatter of the lowest frequency was the most useful for distinguishing variable proportions of rhodolith coverage, and the two higher frequencies were better predictors of presence and absence.
Backscatter has assumed an increasingly important role in seabed mapping and is commonly used as a variable for mapping seabed substrata1,2 and for habitat classification models3,4. Detailed understanding of marine habitats is required to meet multiple ocean management needs, and enhanced habitat classification based on backscatter has enabled fine-scale characterization of the seabed, such as mapping seasonal changes in benthic community composition5, mapping marine benthic carbon stocks6, seagrass habitat mapping7, mapping of rhodolith beds8, and distributions of manganese nodule abundance9.
Although technological and methodological advances have enabled a high level of detail and accuracy in seabed classification, some gaps remain to be investigated. One challenge is the difficulty in distinguishing acoustically similar marine substrates10, such as Posidonia oceanica beds from gravelly sands11, mixed sediments from rhodoliths12, and coarse sediments from mixed sediments1.
Rhodolith beds are a biogenic substrate that serves several important ecological functions. Rhodoliths are free-living calcareous nodules composed of coralline algae13,14. They can cover extensive areas forming beds, which provide important biogenic calcareous habitat for fauna and flora14. They provide several ecosystem services15,16 for example, providing three-dimensional structure to a range of recruitment processes, and serving as a source of CaCO3 production (i.e., a CaCO3 bio-factory)17. Moreover, rhodolith beds may be heterogeneous in structure, and the size and concentration of nodules may differ from one area to another8,18. This has ecological relevance and is also an important mapping consideration since rhodolith beds are typically classified in two binary categories (i.e., presence/absence), even though the coverage and density of the nodules can be spatially variable. Although these beds have a global distribution, the scientific research on rhodoliths is still relatively limited compared to other coastal vegetated habitats such as seagrass and kelp19. Research related to rhodolith mapping is even more limited.
One of the recent advances with great potential to enhance seafloor differentiation and more detailed characterization of rhodolith beds is multispectral acoustic backscatter. Despite a modest literature, some advantages in terms of the power of seabed distinguishment by applying the multi-frequency mapping approach have been demonstrated over a variety of other seafloor sediment types20,21,22,23,24.
In general, several techniques may be used to explore backscatter data, including the use of features from image-based analysis through backscatter mosaics, and angular range analysis (ARA) in which the full angular response is detailed at the cost of spatial resolution. The large amount of information from these different analysis approaches can be effectively utilized using a range of seabed classification tools25,26,27,28. These commonly include machine-learning techniques such as Artificial Neural Networks29,30, Support Vector Machines (SVM)31,32, and Random Forest33. SVM is well suited for raster input (single and multiple bands) and has demonstrated good performance in remote sensing image analysis34,35,36. Additionally, SVM have advantages over other classification methods due to their ability to generalize well even with a limited number or size of training sites, unbalanced number of samples, non-linear distribution, and high feature dimensions32,34.
Here, we apply SVM to map rhodolith beds using a multi-frequency composite band backscatter mosaic for the first time. Underwater images were used to designate seabed classes based on rhodolith coverage, which served as a reference for detailing and understanding the variation of backscatter. The goals of this study have the potential to produce an enhanced detection of the variable rhodolith coverage on the seafloor, informing the conservation of these ecosystems, and providing results that assist the definition of priority areas for monitoring. The objectives were defined as follows: (i) to explore the benefits of multifrequency backscatter compared to a single frequency for supervised classification of rhodolith beds; (ii) to analyze the difference between three acoustic frequencies (170 kHz, 280 kHz, and 400 kHz) regarding rhodolith presence/absence and rhodolith coverage; (iii) to generate a rhodolith map at the study site.
This work is based on a dataset comprising multibeam bathymetry, multispectral backscatter, and drop camera images collected on the offshore portion of the Costa das Algas marine protected area (MPA). This MPA is located along the continental shelf of Espírito Santo, Southeastern Brazil (Fig. 1), which is known for its morphological heterogeneity, incised valleys, and extensive occurrence of rhodolith beds37,38,39.
Map of the study area highlighting the three locations investigated. The map was generated in ArcGIS Pro 3.1.0.
The study was conducted in three distinct areas in the MPA defined by the polygons shown in Fig. 1. The selection of the three polygons was based on the variability of substrate type and seafloor morphology, encompassing sand, gravel, and rhodoliths, ranging from flat to irregular beds, and also the availability of ground truth data. Depths in this area range from 43 to 200 m.
The methodological framework for this work is based on three main steps: (a) backscatter data acquisition and processing; (b) acquisition and processing of drop camera images; (c) support vector machine classification of rhodoliths using the backscatter mosaics.
The multispectral dataset was acquired using an R2Sonic 2024 multibeam echosounder system (MBES), with the sonar head deployed through a moon pool on the survey vessel. The acquisition was configured to maximize the frequency range at which the equipment is capable of operating, including 170, 280, and 400 kHz signals. Acquisition parameters such as power, pulse length (80 µs), gain, and spreading were not changed during the survey. A 90° angular sector and 256 beams were used for all frequencies. The echosounder was not calibrated in the field prior to the survey, yielding backscatter values on a relative scale for each frequency.
The MBES system was paired with a POS MV Wave Master Inertial Navigation System (INS), with differential positioning. Sound velocity profiler casts were deployed every three hours using a Valeport Mini configured to collect sound velocity, salinity, temperature, and pressure. These data are essential to the application of the absorption coefficient, which was the only radiometric correction applied during the data acquisition—all other corrections were applied in post-processing. All systems were synchronized using QPS QINSy 8.18.3 for data acquisition. The bathymetric dataset was assessed during the survey to ensure data quality using QPS Qimera 2.0, and post-processing was carried out using QPS Qimera and FMGT 7.9.5 (Fledermaus Geocoder Toolbox).
Although there is still no unified standard for processing backscatter, the multispectral data were processed following recommendations in40,41. The main steps involved the frequency filtering and correction of acquisition parameters for each frequency (gain, transmit power, pulse length, beam width). Backscatter mosaics were exported at a 0.5 m horizontal resolution. The three mosaics (one for each frequency) were combined into one multiband RGB raster, and all of them serve as input for SVM classification. Additionally, angular information was explored through angular response curves (ARC) graphically sampled for each established class to provide further descriptive acoustic information.
Underwater images from 33 sampling stations were used as ground truth. The locations of the stations were selected to address the distribution and variation of seabed habitat39. Images were collected using a metal frame on which two high-resolution cameras (GoPro HERO7) and lights are coupled to the frame, one with a view towards the bottom, and one with a side/panoramic view of the seascape.
The bottom view images (60 cm × 60 cm quadrats) were individually processed using the freeware ImageJ. Processing included four steps: (i) image enhancement (tuning brightness and contrast); (ii) setting the image size (60 cm × 60 cm); (iii) hand-delineating the rhodoliths; (iv) calculation of the rhodolith coverage area. The results of the last step have provided a reference for establishing the seabed classes and training the classification model.
The class break values of rhodolith coverage are not well standardized in the scientific literature, often being treated as presence or absence. In42, high coverage is categorized as more than 40%, and low coverage is defined as less than 30% of rhodolith coverage; different coverage ranges were considered by8—low coverage corresponding to less than 25%, a moderate class with coverage between 25 and 35%, and high-coverage class indicating more than 35% of rhodolith coverage. In this work, we defined four classes based on the percentage coverage of rhodoliths (see section “Multispectral backscatter mapping”) in order to detail the lower coverage classes to better distinguish between mixed bottoms (e.g., carbonate gravels/fragments from sparce rhodoliths), and also considering the values proposed by the Jenks natural breaks (14.16% and 29.16% adjusted to 15% and 35%, respectively). The final classes were: no rhodolith, percentage coverage of rhodolith up to 15%, percentage coverage of rhodolith between 15 and 35%, and percentage cover greater than 35%.
SVM is a powerful supervised machine-learning technique used for a wide range of tasks and has been increasingly used in image classification for benthic habitat mapping27,32,35,43. This technique does not require an estimation of the statistical distribution of classes to perform the classification and has been producing high classification accuracy even when using a limited amount of training data34,44. Further descriptions of SVM algorithms and method concepts are given by34,45,46.
Here, we handled rasters files and trained an SVM using R (packages terra47, e107148, and caret49) to produce a classification map based on each individual frequency of the backscatter separately and using all the frequencies together. The approach accepts both single-band (backscatter mosaics of each frequency) and multiband (RGB mosaic) imagery and performs the SVM classification based on the input training samples. Herein, only backscatter-related variables served as input to the classifier model. Trials including other morphometric variables such as depth and roughness were performed but did not improve model performance (see Supplementary Information). We note that fine-scale depth is not known to define rhodolith coverage and nodule size, and the relationship among these variables is complex and may vary across continental shelves50.
The backscatter mosaics were stacked and converted to matrices in R. Before performing classification on the backscatter rasters, it is necessary to train the classifier to assign backscatter values to an established class using training samples. The 0.5 m backscatter resolution was unnecessarily high for the purposes of modelling; backscatter rasters were aggregated to 5 m prior to comparison with ground truth data. The boat did not have dynamic positioning, was not anchored during imagery acquisition, and lacked an underwater positioning system. Given the positional uncertainty during ground truth acquisition and the use of lateral/panoramic images for seascape overview, the average backscatter within 50 m radius was assigned to each sampling station. The SVM was configured testing the cost and kernel parameters; a radial basis kernel was ultimately selected with a cost parameter of 3. Defaults for all other parameters were retained (type C-classification, gamma = 1; parameters such as cachesize and tolerance were omitted, following specific package guidelines48). The confusion matrix and accuracy statistics (overall accuracy, balanced accuracy, sensitivity, and specificity) were then calculated to assess classification accuracy and reliability through leave-one-out cross-validation. Using this approach, each data point is withheld in turn to evaluate predictions produced using a model trained on all other data points. Results are tabulated so that the map predictions are evaluated at each data point. The prediction results were outputted as rasters and plotted in ArcGIS Pro.
Underwater image were classified into four classes according to rhodolith coverage: Class 1) No rhodolith; Class 2) < 15%; Class 3) 15–35%; Class 4) > 35%. Figure 2 presents the map with the distribution of the classified sampling stations (Fig. 2a), as well as some examples obtained from drop camera images (Fig. 2b).
(a) Map with classified underwater image sample stations; (b) examples of drop camera images where angular response curves were extracted (see Section “Multispectral backscatter mapping”; Fig. 5); (c) graph showing the different rhodolith coverage for the entire image dataset.
Overall, most of the samples labeled as Class 1 are in the Southern area, while the majority of Class 2 samples are located in the Central area. Classes 3 and 4, with higher rhodolith coverage, appear dominantly in the Northern area.
Backscatter mosaics for each frequency and each area (North area, Central area, and South area) are shown in Fig. 3. Visually, the Central and Northern areas show higher backscatter strength when compared to the Southern area. This is also indicated by the RGB composite multispectral mosaic. The RGB mosaic was additionally useful for visualizing changes in multifrequency backscatter in areas where backscatter differences were visually difficult to detect in the single-frequency mosaics.
Backscatter mosaics for each frequency and multispectral mosaic (RGB-composed bands).
Differences in backscatter observed in the valley bottoms (visible from bathymetry—Fig. 1) of the Northern and Southern areas are noteworthy (profiles in Fig. 4). In the Northern area, the higher frequencies recorded high relative backscatter values, while the lower frequency (170 kHz) returned lower values. Conversely, in the Southern area, all frequencies returned low backscatter values at the bottom of the channel observed.
Backscatter profiles crossing two different valleys.
Angular response curves were extracted at four sample stations (Fig. 5) to explore acoustic properties at representant stations from each class. The underwater images of these sample stations are presented in Fig. 2.
Angular response curves extracted for each frequency at four ground truth stations (Class 1—APA 95, Class 2—APA 05, Class 3—APA 07, Class 4—APA 23).
Considering the higher frequencies (280 and 400 kHz), the greatest decrease in backscatter with increasing incidence angles occurred in Class 1 (no rhodolith); yet in this seabed type, a decrease in backscatter strength at far nadir angles was also strongly observed for the 170 kHz angular response curve. For the other classes, the flatness of angular curve shapes at higher frequencies showed similar results, with low backscatter level loss due to angular incidence. The 170 kHz signal showed an increasing backscatter level loss according to the rhodolith coverage—in other words, a low decrease in backscatter across the swath for Class 2, and higher backscatter decreasing in angular range for Classes 3 and 4.
The four rhodolith classes were predicted over the extent of the three study area polygons using the SVM models. Four classification maps were produced, three of them with only one frequency as input (Fig. 6b), and the final (Fig. 6c) based on multispectral backscatter. In addition, SVM classification was also applied to predict the presence or absence of rhodoliths (Fig. 6a).
SVM model predictions based on (a) presence/absence of rhodoliths; (b) four classes according to percentage coverage of rhodoliths for every single frequency; (c) four classes according to percentage coverage of rhodolith for multispectral input.
The average backscatter value of each frequency was extracted for each class (Table 1). In general, Class 2 presented the highest average backscatter values for all frequencies, and 170 kHz resulted in lower backscatter values for all classes. It is also important to note that the standard deviation (SD) values for Class 1 were the largest for all frequencies, which was expected since this class encompasses a range of seafloor types.
The four-class model based on the 170 kHz mosaic (Fig. 6b) achieved the highest accuracy (Table 2) and was best able to differentiate rhodolith classes in the Northern area compared to the other single frequency models. However, Class 1 (no rhodolith) scarcely appeared on the map (Fig. 6b); moreover, this lower frequency achieved the weakest result considering the prediction of rhodolith presence or absence (Fig. 6a and Table 2). The 280 kHz and 400 kHz models (Fig. 6a and b) were visually similar and presented very close statistics results (Table 2), and were able to distinguish the North and Central areas from the South area, better predicting the presence or absence of rhodoliths (see confusion matrix in Table 3). The SVM model based on the 400 kHz mosaic displayed the worst result considering the recognition of different percentage coverage of rhodolith, as demonstrated by lower values of accuracy, and the absence of Class 4 in the mapped predictions.
The multispectral SVM model (Fig. 6c) seems to have balanced advantages of each frequency, achieving good overall accuracy and balanced accuracy values for both prediction models (Table 2). Although the single 170 kHz model has shown a slightly higher accuracy than the multispectral model for predicting different classes based on rhodolith coverage, the confusion matrices (Table 3) indicate that the errors were quantitatively less severe for the multispectral output if the proximity or similarity between the rhodolith classes would be considered; for example, in a region that should have been classified as Class 4, one station was predicted as Class 3 by the multispectral model, while one station was predicted as Class 1 by the 170 kHz model. Presence/absence results were very similar between multispectral and 280/400 kHz classifiers.
The methods applied to the acoustic data provide an approach to classify the presence and abundance of rhodolith beds to meet the objectives of the study. Contrasted with unsupervised approaches, the images collected here were not used solely as conventional ground truth to validate an interpretation, but rather as training data for supervised classification. Results demonstrate relevance for both the analysis of multispectral backscatter, and for differentiating rhodolith bed characteristics, providing information to support management policies for a high conservation target habitat.
The classification suggested a trend toward greater presence of rhodoliths in the Northern area–consistent with previous mapping in the region39. It is evident from the output of the SVM using all frequencies (Fig. 6c) that the differences from the backscatter profile crossing the shelf valleys in the Northern and Southern areas (Fig. 4) have been effectively utilized. In the valley of the Northern area, the higher frequencies have greater backscatter values and were classified as Class 4 (with more than 35% rhodolith), while the lower frequency had lower backscatter values suggesting that the roughness of the rhodolith beds has more influence for wavelengths of the 280 kHz and 400 kHz frequencies. The valley located in the Northern polygon was also differentiated by39, although they used single-frequency backscatter and another classification technique based on bathymetry and geomorphology. In the Southern area, all frequencies showed lower backscatter values crossing the channel region and were classified as Class 1 (no rhodolith).
This analysis corroborates the use of MBES backscatter as a valuable proxy for benthic habitat and substrate mapping. Multispectral backscatter appears to be effective both at providing information for mapping different concentrations of rhodoliths and predicting the presence or absence of these nodules.
The SVM classifier was able to capitalize on the benefits afforded by multispectral backscatter for seafloor differentiation compared to the use of single-frequency data (Fig. 6c). Other works have explored the potential of multispectral data on muddy and sandy bottoms22,24,51, but this is explored for the first time on rhodolith beds here by applying the same classification settings for single-frequency and multi-frequency backscatter. The two higher frequencies, when applied separately as input, indicated good discrimination of rhodolith presence or absence. The 170 kHz frequency was essential for modeling different densities of rhodoliths. Achieving both forms of classification would be far less feasible using a single-frequency system.
The angular range curves provide additional information about the acoustic response of each frequency across the different classes, complementing the image-based classification approach, in line with previous studies22,52. The RGB mosaic serves as an effective tool for visualizing backscatter differences across multiple frequencies. Angular response curves suggested that the lowest frequency was crucial to differentiate the percentage coverage of rhodoliths between classes, since the angular response at higher frequencies was very similar for the different proportions of rhodolith cover, while the 170 kHz angular response was better at differentiating mainly Class 2 from Classes 3 and 4 (higher decrease in backscatter across the swath in classes with more rhodoliths).
The caveat to a multispectral mapping approach is that the large volume of information generated by multiple frequencies must be supported by equally intensive ground truth sampling. This is likely the greatest limiting factor to multispectral MBES thematic mapping–the utility of such data is constrained by the amount and quality of ground truth data. Relatedly, inaccurate positioning will reduce the capacity to relate substrate observations to the multi-dimensional high-resolution acoustic data. Limited ground truth data and inaccurate position are likely to compound and substantially limit the detail that may be resolved through multispectral data; this is likely the greatest shortcoming of the work presented here.
The acoustic characterization of rhodoliths is very important both for the study of the relationships between backscatter and geodiversity, but also for biodiversity, since rhodolith beds are an ecologically important biogenic substrate. Rhodoliths can form banks over the underlying sediments and are considered bioengineers, adding complexity to the seafloor15,53. The SVM classification applied to map different densities of rhodoliths highlights the utility of backscatter for seabed classification and suggests its possible use as an “essential geodiversity variable” (EGV)54,55—an important proxy for the study of geo- and biodiversity. Ref.56 additionally demonstrated backscatter variations in rhodolith beds when associated with different seafloor types, and Ref.8 interpreted variations in backscatter and nodule density driven by morphology. Although the role of inorganic carbon in the overall carbon sequestration is not well understood57, these findings are relevant to better mapping and quantifying marine carbon stores, or even contribute to the study of blue carbon6, CaCO3 production17,57, and also to the seasonal context related to algal cover5 in rhodolith bottoms.
Although it is visually difficult to detect the difference between rhodolith Classes 3 and 4 based on either the mosaic or the ARC, the backscatter values increase slightly for the higher frequencies from Class 3 to 4. In other words, the higher concentration of rhodoliths resulted in an increased backscatter strength for the higher frequencies, which can be understood as a higher scattering recorded at the shorter wavelengths due to the roughness of the rhodolith nodules. Conversely, a decrease in average backscatter from Class 3 to 4 (− 22.6 and − 24.5 dB, respectively) was observed in the lower frequency response. Class 2, on the other hand, showed the highest mean backscatter values extracted from the mosaics despite the lower concentration of rhodoliths. This response can also be observed in the flatness of the ARC shape of the lowest frequency for Class 2. To better understand these findings, several factors could be further explored, such as the relationship between substrate type and depth (for example, Classes 3 and 4 tend to be in slightly deeper environments than Class 2), the acoustic influence of epiflora attached to the surface of the nodules on the seafloor with higher rhodolith concentration, and even the potential effect of the underlying sediment. In the absence of a more detailed granulometric analysis of this latter effect, we can only infer the influence of the higher presence of carbonate fragments/gravel in Class 2 than in Classes 3 and 4. Moreover, it is relevant to emphasize that the comparisons carried out between frequencies were done in a relative way, in other words, comparing the shape of the ARCs and the spatial trends visible in the backscatter mosaics, excluding the possible effects due to the lack of acoustic calibration on the absolute values of backscatter (dB), which is topic of active research58 that is likely to contribute further to seabed classification by enabling backscatter intercomparison for different bottom types and different systems.
A synthesis of case studies on acoustic mapping of rhodoliths is shown in Table 4. None of these studies applied multispectral backscatter, nor did they apply both image-based and ARA analysis approaches. Overall, the authors identify that rhodolith beds are generally associated with higher backscatter intensity, corresponding with results presented here on the higher frequencies that achieved higher accuracy considering the presence or absence model (even Class 1 encompassing a range of seafloor types–mixed, sand, and bioclast). Comparable results indicating elevated backscatter values for higher concentrations of polymetallic nodules has also been observed9. Capacity to successfully distinguish mixed bottoms from rhodolith beds (including different rhodolith cover patterns) is an important finding here, which was enabled by the use of multiple frequencies, overcoming difficulties in distinguishing similar bottom types12,59.
Backscatter data and underwater images were used to train a model and generate a seabed rhodolith classification. The results show the potential for distinguishing distinct classes of rhodolith coverage, and emphasize the importance of multispectral backscatter as a proxy for biogenic substrate and seafloor types. New acoustic information about these carbonate nodules was explored, and an SVM analysis using MBES multifrequency data was developed enabling rhodolith mapping across the Costa das Algas marine protected area.
Multispectral backscatter data were successfully classified, achieving good cross-validation accuracy and confirming the potential to enhance seafloor discrimination. The 170 kHz frequency was the most important for distinguishing variable rhodolith coverage. The other two higher frequencies were better predictors of presence and absence. Additionally, the angular range analyses provided further descriptive information on the acoustic signatures of each frequency for the rhodolith beds, for example, showing different and unexpected patterns of decreasing backscatter strength with an increasing incident angle in rhodolith beds, mainly for the lower frequency.
Results from this study indicate that heterogeneous rhodolith beds may be mapped and differentiated using multispectral backscatter data classified by SVM, as well as the possibility to predict the presence or absence of nodules. This result is an important achievement for high-resolution rhodolith mapping, demonstrating that rhodolith bed structure can be accurately mapped using multi-frequency acoustic remote sensing.
The datasets generated during and/or analysed during the current study are available from the corresponding author on reasonable request.
Diesing, M., Mitchell, P. J., O’Keeffe, E., Gavazzi, G. O. A. M. & Bas, T. L. Limitations of predicting substrate classes on a sedimentary complex but morphologically simple seabed. Remote Sens. 12, 3398 (2020).
Article ADS Google Scholar
Trzcinska, K. et al. Spectral features of dual-frequency multibeam echosounder data for benthic habitat mapping. Mar. Geol. 427, 106239 (2020).
Article ADS Google Scholar
Brown, C. J. & Blondel, P. Developments in the application of multibeam sonar backscatter for seafloor habitat mapping. Appl. Acoust. 70, 1242–1247 (2009).
Article Google Scholar
Ierodiaconou, D. et al. Combining pixel and object based image analysis of ultra-high resolution multibeam bathymetry and backscatter for habitat mapping in shallow marine waters. Mar. Geophys. Res. 39, 271–288 (2018).
Article Google Scholar
Schulze, I., Gogina, M., Schönke, M., Zettler, M. L. & Feldens, P. Seasonal change of multifrequency backscatter in three Baltic Sea habitats. Front. Remote Sens. 3, 956994 (2022).
Article Google Scholar
Hunt, C. A., Demšar, U., Marchant, B., Dove, D. & Austin, W. E. N. Sounding out the carbon: The potential of acoustic backscatter data to yield improved spatial predictions of organic carbon in marine sediments. Front. Mar. Sci. 8, 756400 (2021).
Article Google Scholar
Rende, S. F. et al. Ultra-high-resolution mapping of Posidonia oceanica (L.) delile meadows through acoustic, optical data and object-based image classification. JMSE 8, 647 (2020).
Article Google Scholar
Rocha, G. A. et al. Heterogeneity of rhodolith beds expressed in backscatter data. Mar. Geol. 423, 106136 (2020).
Article ADS Google Scholar
Kuhn, T. & Rühlemann, C. Exploration of polymetallic nodules and resource assessment: A case study from the german contract area in the clarion-clipperton zone of the tropical northeast pacific. Minerals 11, 618 (2021).
Article ADS CAS Google Scholar
Lucieer, V., Hill, N. A., Barrett, N. S. & Nichol, S. Do marine substrates ‘look’ and ‘sound’ the same? Supervised classification of multibeam acoustic data using autonomous underwater vehicle images. Estuar., Coast. Shelf Sci. 117, 94–106 (2013).
Article ADS Google Scholar
De Falco, G. et al. Relationships between multibeam backscatter, sediment grain size and Posidonia oceanica seagrass distribution. Cont. Shelf Res. 30, 1941–1950 (2010).
Article ADS Google Scholar
Parnum, I. M. & Gavrilov, A. N. High-frequency multibeam echo-sounder measurements of seafloor backscatter in shallow water: Part 2–Mosaic production, analysis and classification. Uw Tech: Int. J. Soc. Uw Tech. 30, 13–26 (2011).
Google Scholar
Bosence, D. W. J. Coralline algal reef frameworks. JGS 140, 365–376 (1983).
Article Google Scholar
Foster, M. S. Rhodoliths: Between rocks and soft places. J. Phycol. 37, 659–667 (2001).
Article Google Scholar
Nelson, W. A. Calcified macroalgae–critical to coastal ecosystems and vulnerable to change: A review. Mar. Freshwater Res. 60, 787 (2009).
Article CAS Google Scholar
Basso, D., Babbini, L., Kaleb, S., Bracchi, V. A. & Falace, A. Monitoring deep Mediterranean rhodolith beds. Aquat. Conserv. Mar. Freshw. Ecosyst. 26, 549–561 (2016).
Article ADS Google Scholar
Amado-Filho, G. M. et al. Rhodolith beds are major CaCO3 bio-factories in the tropical south west atlantic. PLoS ONE 7, e35171 (2012).
Article ADS CAS PubMed PubMed Central Google Scholar
Bahia, R. G., Abrantes, D. P., Brasileiro, P. S., Pereira Filho, G. H. & Amado Filho, G. M. Rhodolith bed structure along a depth gradient on the northern coast of bahia state, brazil. Braz. J. Oceanogr. 58, 323–337 (2010).
Article Google Scholar
Rendina, F., Buonocore, E., di Montanara, A. C. & Russo, G. F. The scientific research on rhodolith beds: A review through bibliometric network analysis. Ecol. Inform. 70, 101738 (2022).
Article Google Scholar
Fakiris, E. et al. Multi-frequency, multi-sonar mapping of shallow habitats—efficacy and management implications in the national marine park of Zakynthos, Greece. Remote Sens. 11, 461 (2019).
Article ADS Google Scholar
Runya, R. M. et al. Examining the links between multi-frequency multibeam backscatter data and sediment grain size. Remote Sens. 13, 1539 (2021).
Article ADS Google Scholar
Menandro, P. S., Bastos, A. C., Misiuk, B. & Brown, C. J. Applying a multi-method framework to analyze the multispectral acoustic response of the seafloor. Front. Remote Sens. 3, 860282 (2022).
Article Google Scholar
Hughes Clarke, J. E., Multispectral acoustic backscatter from multibeam, improved classification potential. In Proceedings of the US Hydrographic Conference, National Harbor, MI, USA, p. 18 (2015).
Gaida, T. et al. A multispectral bayesian classification method for increased acoustic discrimination of seabed sediments using multi-frequency multibeam backscatter data. Geosciences 8, 455 (2018).
Article ADS Google Scholar
Diesing, M., Mitchell, P. & Stephens, D. Image-based seabed classification: What can we learn from terrestrial remote sensing?. ICES J. Mar. Sci. 73, 2425–2441 (2016).
Article Google Scholar
Rowden, A. A. et al. High-resolution habitat suitability models for the conservation and management of vulnerable marine ecosystems on the louisville seamount chain. South Pacific Ocean. Front. Mar. Sci. 4, 335 (2017).
Article Google Scholar
Wicaksono, P., Aryaguna, P. A. & Lazuardi, W. Benthic habitat mapping model and cross validation using machine-learning classification algorithms. Remote Sens. 11, 1279 (2019).
Article ADS Google Scholar
Alevizos, E. & Greinert, J. The hyper-angular cube concept for improving the spatial and acoustic resolution of MBES backscatter angular response analysis. Geosciences 8, 446 (2018).
Article ADS Google Scholar
Marsh, I. & Brown, C. Neural network classification of multibeam backscatter and bathymetry data from Stanton Bank (Area IV). Appl. Acoust. 70, 1269–1276 (2009).
Article Google Scholar
Misiuk, B. & Brown, C. J. Multiple imputation of multibeam angular response data for high resolution full coverage seabed mapping. Mar. Geophys. Res. 43, 7 (2022).
Article Google Scholar
Stephens, D. & Diesing, M. A Comparison of supervised classification methods for the prediction of substrate type using multibeam acoustic and legacy grain-size data. PLoS ONE 9, e93950 (2014).
Article ADS PubMed PubMed Central Google Scholar
Cui, X. et al. Seafloor habitat mapping using multibeam bathymetric and backscatter intensity multi-features SVM classification framework. Appl. Acoust. 174, 107728 (2021).
Article Google Scholar
Porskamp, P., Rattray, A., Young, M. & Ierodiaconou, D. Multiscale and hierarchical classification for benthic habitat mapping. Geosciences 8, 119 (2018).
Article ADS Google Scholar
Mountrakis, G., Im, J. & Ogole, C. Support vector machines in remote sensing: A review. ISPRS J. Photogramm. Remote Sens. 66, 247–259 (2011).
Article ADS Google Scholar
Eugenio, F., Marcello, J. & Martin, J. High-resolution maps of bathymetry and benthic habitats in shallow-water environments using multispectral remote sensing imagery. IEEE Trans. Geosci. Remote Sens. 53, 3539–3549 (2015).
Article ADS Google Scholar
Zhang, C. Applying data fusion techniques for benthic habitat mapping and monitoring in a coral reef ecosystem. ISPRS J. Photogramm. Remote Sens. 104, 213–223 (2015).
Article ADS Google Scholar
Vieira, F. V. et al. Along-shelf changes in mixed carbonate-siliciclastic sedimentation patterns. Cont. Shelf Res. 187, 103964 (2019).
Article Google Scholar
de Oliveira, N., Lavagnino, A. C., Rocha, G. A., de Moura, R. L. & Bastos, A. C. Geomorphological significance of shelf-incised valleys as mesophotic habitats. Front. Remote Sens. 4, 1111825 (2023).
Article Google Scholar
Menandro, P. S. et al. The role of benthic habitat mapping for science and managers: A multi-design approach in the Southeast Brazilian Shelf after a major man-induced disaster. Front. Mar. Sci. 9, 1004083 (2022).
Article Google Scholar
Lamarche, G. & Lurton, X. Recommendations for improved and coherent acquisition and processing of backscatter data from seafloor-mapping sonars. Mar. Geophys. Res. 39, 5–22 (2018).
Article Google Scholar
Schimel, A. C. G. et al. Multibeam sonar backscatter data processing. Mar. Geophys. Res. 39, 121–137 (2018).
Article ADS Google Scholar
Matsuda, S. & Iryu, Y. Rhodoliths from deep fore-reef to shelf areas around Okinawa-jima, Ryukyu Islands, Japan. Marine Geol. 282, 215–230 (2011).
Article ADS Google Scholar
Che Hasan, R., Ierodiaconou, D. & Monk, J. Evaluation of four supervised learning methods for benthic habitat mapping using backscatter from multi-beam sonar. Remote Sens 4, 3427–3443 (2012).
Article ADS Google Scholar
Mantero, P., Moser, G. & Serpico, S. B. Partially supervised classification of remote sensing images through SVM-based probability density estimation. IEEE Trans. Geosci. Remote Sensing 43, 559–570 (2005).
Article ADS Google Scholar
Burges, C. J. C. A tutorial on support vector machines for pattern recognition. Data Min. Knowl. Discov. 2, 121–167 (1998).
Article Google Scholar
Huang, C., Davis, L. S. & Townshend, J. R. G. An assessment of support vector machines for land cover classification. Int. J. Remote Sens. 23, 725–749 (2010).
Article Google Scholar
Hijmans R., _terra: Spatial Data Analysis_. R package version 1.6–47, <https://CRAN.R-project.org/package=terra> (2022)
Meyer, D., Dimitriadou, E., Hornik, K., Weingessel, A., Leisch, F., _e1071: Misc Functions of the Department of Statistics, Probability Theory Group (Formerly: E1071), TU Wien_. R package version 1.7–13, <https://CRAN.R-project.org/package=e1071> (2023).
Kuhn, M. Building predictive models in R using the caret package. J. Stat. Soft. 28, (2008).
Horta, P. A. et al. Rhodoliths in Brazil: Current knowledge and potential impacts of climate change. Braz. J. Oceanogr. 64, 117–136 (2016).
Article Google Scholar
Brown, C., Beaudoin, J., Brissette, M. & Gazzola, V. Multispectral multibeam echo sounder backscatter as a tool for improved seafloor characterization. Geosciences 9, 126 (2019).
Article ADS Google Scholar
Che Hasan, R., Ierodiaconou, D., Laurenson, L. & Schimel, A. Integrating multibeam backscatter angular response, mosaic and bathymetry data for benthic habitat mapping. PLoS ONE 9, e97339 (2014).
Article ADS PubMed PubMed Central Google Scholar
de Figueiredo, M. O., de Menezes, K. S., Costa-Paiva, E., Paiva, P. & Ventura, C. Experimental evaluation of rhodoliths as living substrata for infauna at the Abrolhos Bank, Brazil. Ciencias Marinas 33, 427–440 (2007).
Article Google Scholar
Schrodt, F. et al. To advance sustainable stewardship, we must document not only biodiversity but geodiversity. Proc. Natl. Acad. Sci. USA 116, 16155–16158 (2019).
Article ADS CAS PubMed PubMed Central Google Scholar
Dolan, M., Bøe, R. & Bjarnadóttir, L. R. Delivering seabed geodiversity information through multidisciplinary mapping initiatives: Experiences from Norway. GEUS Bull. 52, (2022).
Innangi, S. et al. Seabed mapping in the Pelagie Islands marine protected area (Sicily Channel, southern Mediterranean) using remote sensing object based image analysis (RSOBIA). Mar. Geophys. Res. 40, 333–355 (2019).
Article Google Scholar
Macreadie, P. I., Serrano, O., Maher, D. T., Duarte, C. M. & Beardall, J. Addressing calcium carbonate cycling in blue carbon accounting. Limnol. Oceanogr. Lett. 2, 195–201 (2017).
Article Google Scholar
Roche, M. et al. Control of the repeatability of high frequency multibeam echosounder backscatter by using natural reference areas. Mar. Geophys. Res. 39, 89–104 (2018).
Article Google Scholar
Micallef, A. et al. A multi-method approach for benthic habitat mapping of shallow coastal areas with high-resolution multibeam data. Cont. Shelf Res. 39–40, 14–26 (2012).
Article ADS Google Scholar
Chimienti, G. et al. Rhodolith beds heterogeneity along the apulian continental shelf (Mediterranean Sea). JMSE 8, 813 (2020).
Article Google Scholar
Download references
The first author was granted an international scholarship from the Coordenação de Aperfeiçoamento de Pessoal de Nível Superior—Brazil (CAPES)—Finance Code 001 at Dalhousie University. This work was supported by Environmental Monitoring Program—PMBA (Fundação Renova—FEST) and FAPES/CAPES PELD ABROLHOS. This research is part of the Ocean Frontier Institute Benthic Ecosystem Mapping and Engagement (BEcoME) Project. This paper is a contribution of Rede Abrolhos. AB is a CNPq Research Fellow PQ-1C. APC was supported by FAPES.
Marine Geosciences Lab (Labogeo), Departamento de Oceanografia E Ecologia, Universidade Federal do Espírito Santo, Vitória, ES, Brazil
Pedro S. Menandro & Alex C. Bastos
Seascape Ecology and Mapping Lab, Department of Oceanography, Dalhousie University, Halifax, NS, Canada
Benjamin Misiuk & Craig J. Brown
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
P.M.: data acquisition and processing, conceptualization, methodology, software, formal analysis, investigation, Writing – original draft; B.M.: conceptualization, methodology, software, formal analysis, Writing – review & editing; C.B.: conceptualization, supervision, writing – review & editing; A.B.: conceptualization, supervision, resources, writing – review & editing, funding acquisition.
Correspondence to Alex C. Bastos.
The authors declare no competing interests.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Reprints and Permissions
Menandro, P.S., Misiuk, B., Brown, C.J. et al. Multispectral multibeam backscatter response of heterogeneous rhodolith beds. Sci Rep 13, 20220 (2023). https://doi.org/10.1038/s41598-023-46240-7
Download citation
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-023-46240-7
Anyone you share the following link with will be able to read this content:
Sorry, a shareable link is not currently available for this article.
Provided by the Springer Nature SharedIt content-sharing initiative
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
Advertisement
© 2023 Springer Nature Limited
Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.